Ducky 16 – Ducky

Ducky 16 catamaran is designed for family leisure time under the sails. In the design of this catamaran, the emphasis is on simplicity and speed of assembly, which makes it possible to use it as a weekend boat.

The simple construction of the catamaran let’s you assemble it in 30 minutes without any tools used! A strong frame, balanced sails and a large load capacity make it possible to use Ducky 16 not only for few-hour sailing, but also for a weekend trips.

Steering of this catamaran can be handled by one person.

Technical data of Ducky 16

Length (m)	4.8
Width (m)	2.4
Height (m)	6.6
Diameter of floats (m)	0.54
Jib sail area (sq.m)	2.3
Main sail area (sq.m)	7.3
Gennaker sail area (sq.m)	10
Length \ Width of front trampoline (m)	1.4 / 1.9
Length \ Width of main trampoline (m)	1.8 / 1.9
Carrying capacity (kg)	350
Weight (kg)	65
Dimensions in packed condition (m): Pack №1 Pack №2 Pack №3	1.8 х 0.25 х 0.25 1.8 х 0.4 х 0.25 0.8 х 0.4 х 0.3
Time of Assembly \ Disassembly (min)	35 / 25
Recommended engine power (hp)	3.3
Boat design category (Directives 94/25/EC and 2003/44/EC)	D

Additionally, it is possible to install an outboard engine with the power of 3.3 hp on the catamaran. For this purpose, a special transom board fastening to the stern beam is provided.

For those who have already mastered the steering of the catamaran in the basic setup, and want to get even more thrills, there is an additional sail – Gennaker. This is an asymmetric spinnaker, which works perfect in a downwind. Gennaker will significantly increase the speed. In a fresh wind with gennaker the catamaran is able to go into the gliding mode!

In the production of our catamarans, we use only high-quality materials and components from the world’s leading manufacturers. The frame, mast and connectors are made of aluminum alloy, which has high strength and lightness, and also has high corrosion resistance in sea water. For additional protection against corrosion, all parts are anodized. Сenterboard and rudder of fiberglass reinforced plastic. Sail made of Dimension-Polyant dacron (170 g/m2) or mylar. All fastening elements are made of stainless steel. Hulls of two sections made out of Valmex, special PVC boat fabric (1000 g/sq.m).

Additional options

V-SHAPE BOW HULLS

Floats with shaped stems have more streamline form that enhances their hydrodynamics. In practice catamaran with such floats has softer sailing and better speeds comparing to standard floats due to lower frontal resistance. This advantage is easily noticeable when sailing sharp courses against a short steep wave. These floats are recommended for achieving higher speeds and better results, especially if you plan to attend regattas.

GENNAKER

The gennaker is an additional sail for downwind sailing including crosswind and close reach. When the fresh wind blows, the catamaran with gennaker can reach planing mode and increases speed significantly. This is recommended for people who are already experienced in sailing and would like to achieve higher speeds.

OUTBOARD MOTOR BRACKET

Outboard bracket is aimed for mounting a boat motor with a long shaft. The recommended engine output is 3.3 hp.

TILLER EXTENSION

Tiller extension is aimed for steering tiller at a distance. This is a useful option which enables you to relocate the weight on the trampoline and follow the correct trim (loading of the stern or bow) of the catamaran.

SIDE POCKETS

Side pockets are designed for keeping small things, clothes and other stuff. Standard oars can be kept there as well. Pockets are made from a micro-net fabric. Pockets can be placed on the right and left broadsides which in turn also creates additional protection from wind and water splashes.

MAST FLOAT

The float on a mast is an inflatable tank. It would not allow the catamaran to turn the mast down. Such a float will hold a catamaran on one side when catamaran is turned over and will not let it fully capsize. It won’t allow the mast to sink and hit the bottom and would prevent possible damages to the mast. The float on a mast has an aerodynamic shape. When needed, it is easily mounted and unmounted without using any tools. Floats are equipped with the fasteners.

SAIL FEEDER

Sail feeder is a useful option that significantly simplifies mainsail ascent. It directs the bolt rope into the mast track and eliminates the jamming of the sail during the ascent.