Ducky 14s – Ducky

Ducky14s is an uncompromising racing catamaran. The prefix “s” is an abbreviation for sport, which testifies to the sports character of this model.

As a result of experiments and research, it was possible to create a unique design that combines the best qualities of inflatable and solid-body catamarans. Sensations of handling this catamaran are similar to those of handling a solid-body catamaran. At the same time, due to the small weight of the catamaran itself, even better dynamics are achieved. Low keel shape of the floats in combination with the two rudders provides an excellent steering and control in all weather conditions.

Having such a simple design, the catamaran is assembled without the use of any tools within 30 minutes!

Technical data of Ducky 14s

Length (m)	4.4
Width (m)	2.2
Height (m)	7.0
Diameter of floats (m)	0.45
Main sail area (sq.m)	9.0
Gennaker sail area (sq.m)	–
Length \ Width of trampoline (m)	1.8 / 2.2
Carrying capacity (kg)	250
Weight (kg)	62
Dimensions in packed condition (m): Pack №1 Pack №2 Pack №3 Sail	1.8 х 0.25 х 0.25 1.8 х 0.25 х 0.25 0.8 х 0.4 х 0.3 1.95 x 0.22 x 0.22
Time of Assembly \ Disassembly (min)	30 / 20
Recommended engine power (hp)	3.0
Boat design category (Directives 94/25/EC, 2003/44/EC and 2013/53/EU)	D

Additionally, it is possible to install an outboard engine with the power of 3.3 hp on the catamaran. For this purpose, a special transom board fastening to the stern beam is provided.

In the production of our catamarans, we use only high-quality materials and components from the world’s leading manufacturers. The frame, mast and connectors are made of aluminum alloy, which has high strength and lightness, and also has high corrosion resistance in sea water. For additional protection against corrosion, all parts are anodized. Сenterboard and rudder are made of fiberglass reinforced plastic. Sail is made of Dimension-Polyant dacron (170 g/m2) or mylar. All fastening elements are made of stainless steel. Hulls have two sections and are made of Valmex, special PVC boat fabric (1000 g/sq.m).

Additional options

OUTBOARD MOTOR BRACKET

Outboard bracket is aimed for mounting a boat motor with a long shaft. The recommended engine output is 3.0 hp.

MAST FLOAT

The float on a mast is an inflatable tank. It would not allow the catamaran to turn the mast down. Such a float will hold a catamaran on one side when catamaran is turned over and will not let it fully capsize. It won’t allow the mast to sink and hit the bottom and would prevent possible damages to the mast. The float on a mast has an aerodynamic shape. When needed, it is easily mounted and unmounted without using any tools. Floats are equipped with the fasteners.

SAIL FEEDER

Sail feeder is a useful option that significantly simplifies mainsail ascent. It directs the bolt rope into the mast track and eliminates the jamming of the sail during the ascent.